path: root/issues/systems/mariadb/move-to-innodb.gmi

# MariaDB: Move to InnoDB Engine

We are going to move from myisam to innodb. Penguin2 has been happily running innodb for some time.

Main problem are fulltext columns, the text from Trello is captured below. This is for the following tables

* ProbeSet
* GeneRIF_BASIC
* pubmedsearch

Initial good candidates are (from issues/database-not-responding):

* Good candidates
  + 2.1G Dec  4 22:15 ProbeSetXRef.MYD (done!)
  + 2.3G Dec 18 14:56 ProbeSet.MYD - with fulltext column
  + 2.6G Aug 27  2019 ProbeSE.MYD (used?)
  + 7.1G Nov  2 05:07 ProbeSetSE.MYD (done!)
  +  11G Aug 27  2019 ProbeData.MYD (used?)
  +  63G Dec  4 22:15 ProbeSetData.MYD

I am starting with the two SE tables first - because they are small.

Actually ProbeData and ProbeSE (containing the Affy data) are not referenced in GN2. I need to check that.

## Report

With the SQL database we need to move from myisam to innodb format,
mostly to stop the problem of full table locks. Also I expect the
occasional crashes we see to go away.

Today, as a start, I moved the ProbeSetSE table to innodb. The result
is that the disk representation is 3x the size and a full table scan
takes 3x the time (somewhat unsurprising). This may impact
correlation, i.e. those routines that go through all the data. We'll
have to test that carefully. For the SE I don't think we do that, so
it is no biggie.

There are no real performance gains that I can tell, though for the
mapping page I see no slowing down either.

I'll need to free up space on the NVME storage to do the larger
tables.

I also took the opportunity to add a primary key because InnoDB
requires it and I changed the *table* language from latin1-sweden to
utf8. These are major upgrades.

There are no real performance gains that I can tell, though for the
mapping page I see no slowing down either.

I'll need to free up space on the NVME storage to do the larger
tables.

I also took the opportunity to add a primary key because InnoDB
requires it and I changed the *table* language from latin1-sweden to
utf8. These are major upgrades.

In the coming week I'll have to reboot the server to add a disk, move
stuff across to free up space on the NVME, and convert a few more
tables. I aim to get the largest tables done - because these are the
one that hurt when locked:

* Good candidates with update times
  + 2.1G Dec  4 22:15 ProbeSetXRef.MYD
  + 2.3G Dec 18 14:56 ProbeSet.MYD - with fulltext column
  + 2.6G Aug 27  2019 ProbeSE.MYD
  + 7.1G Nov  2 05:07 ProbeSetSE.MYD
  +  11G Aug 27  2019 ProbeData.MYD
  +  63G Dec  4 22:15 ProbeSetData.MYD

(note each is about double that size because of indexes)

ProbeSetSE is done. So ProbeData and ProbeSetData are the main
candidates right now.

Note I set buffers to 16GB for now

```
+innodb_buffer_pool_size=16G
+innodb_ft_min_token_size=3
+# innodb_use_sys_malloc=0
+innodb_file_per_table=ON
```

## Check database

```
time mysqlcheck -c -u webqtlout -pwebqtlout db_webqtl
```

To check one single table Probe

```
root@tux01:/var/lib/mysql/db_webqtl# mysqlcheck -c db_webqtl -u webqtlout -pwebqtlout Probe
db_webqtl.Probe                                    OK
```

Make sure we have not a FULLTEXT column we do not know about (note it needs backquotes around ls):

```
root@tux01:/var/lib/mysql/db_webqtl# for x in ls -1 *.MYD|sed -e 's,\.MYD,,' ; do echo $x ; mysql -u webqtlout -pwebqtlout db_webqtl -e "select group_concat(distinct column_name) from information_schema.STATISTICS where table_schema = 'db_webqtl' and table_name = '$x' and index_type = 'FULLTEXT'" ; done|less
GeneRIF_BASIC
ProbeSet
pubmedsearch
```

still the same.

## Create a test

Start with ProbeSetSE

```
-rw-rw---- 1 mysql mysql 8.1G Dec 28 08:39 ProbeSetSE.MYI
-rw-rw---- 1 mysql mysql 7.1G Nov  2 05:07 ProbeSetSE.MYD
-rw-rw---- 1 mysql mysql 8.5K Feb  3  2021 ProbeSetSE.frm
```

```
MariaDB [db_webqtl]> select * from ProbeSetSE limit 2;
+--------+----------+----------+
| DataId | StrainId | error    |
+--------+----------+----------+
|      1 |        1 | 0.681091 |
|      1 |        2 | 0.361151 |
+--------+----------+----------+
2 rows in set (0.001 sec)

MariaDB [db_webqtl]> select count(*) from ProbeSetSE limit 2;
+-----------+
| count(*)  |
+-----------+
| 688744613 |
+-----------+
1 row in set (0.000 sec)
```

```
MariaDB [db_webqtl]> flush tables ProbeSetSE;
Query OK, 0 rows affected (0.002 sec)
```

```
MariaDB [db_webqtl]> select count(*) from ProbeSetSE where error<0.36;
+-----------+
| count(*)  |
+-----------+
| 601603553 |
+-----------+
1 row in set (1 min 1.189 sec)
```

Some testing shows strainid and error are not indexed. Test query on myisam:

```
MariaDB [db_webqtl]> select count(*) from ProbeSetSE where strainid<20 and error<0.10;
+----------+
| count(*) |
+----------+
| 61625074 |
+----------+
1 row in set (58.301 sec)
```

Check index and primary key (PK):

```
SHOW CREATE TABLE ProbeSetSE;

| ProbeSetSE | CREATE TABLE "ProbeSetSE" (
  "DataId" int(10) unsigned NOT NULL DEFAULT 0,
  "StrainId" smallint(5) unsigned NOT NULL DEFAULT 0,
  "error" float NOT NULL,
  UNIQUE KEY "DataId" ("DataId","StrainId")
) ENGINE=MyISAM DEFAULT CHARSET=latin1 |
```

Note the latin1 we don't need. Also innodb needs a primary key.

The mapping page retrieves SE through a call to

```
retrieve_sample_data(this_trait, dataset)
```

we also have an API endpoint

```
@app.route("/api/v_{}/sample_data/<path:dataset_name>".format(version))
@app.route("/api/v_{}/sample_data/<path:dataset_name>.<path:file_format>".format(version))
def all_sample_data(dataset_name, file_format="csv"):
```

But I can't get it to work for a trait.

```
curl "http://genenetwork.org/api/v_pre1/sample_data/1427571_at"
```

so, instead, I exported the CSV from

=> http://genenetwork.org/show_trait?trait_id=1427571_at&dataset=HC_M2_0606_P

It took the server 2.02924s seconds to process this page.
It took your browser 1.577 second(s) to render this page.

This is our test 'setup'.

## Backup and convert table

On Tux01 the database is hosted on a drive with 111 GB free. Not enough for all conversions. There should be an extra drive in there which requires configuration with reboot. But first we can convert this small table. Backups we have already automated. But I'll add

```
tar cvzf /home/wrk/ProbeSetSE.tgz ProbeSetSE*
```

To convert to InnoDB we should:

* ascertain primary key
* change charset
* change engine to InnoDB
* make space on disk drive(s)

### Set primary key

For ProbeSetSE note the UNIQUE key was already defined. So set a primary key:

```
ALTER TABLE ProbeSetSE
  ADD PRIMARY KEY(DataId,StrainId);
Query OK, 688744613 rows affected (15 min 13.830 sec)
Records: 688744613  Duplicates: 0  Warnings: 0
```

Unsurprisingly the index grew

```
-rw-rw---- 1 mysql mysql  16G Dec 28 11:06 ProbeSetSE.MYI
```

### Change charset

```
MariaDB [db_webqtl]> SHOW CHARACTER SET LIKE 'utf8mb4';
+---------+---------------+--------------------+--------+
| Charset | Description   | Default collation  | Maxlen |
+---------+---------------+--------------------+--------+
| utf8mb4 | UTF-8 Unicode | utf8mb4_general_ci |      4 |
+---------+---------------+--------------------+--------+
1 row in set (0.000 sec)
```

```
MariaDB [db_webqtl]> ALTER TABLE ProbeSetSE CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;
Stage: 2 of 2 'Enabling keys'      0% of stage done
Query OK, 688744613 rows affected (15 min 14.380 sec)
Records: 688744613  Duplicates: 0  Warnings: 0
```

For this table it has no effect since there are not text fields. Still this looks good:

```
SHOW CREATE TABLE ProbeSetSE;
| ProbeSetSE | CREATE TABLE "ProbeSetSE" (
  "DataId" int(10) unsigned NOT NULL DEFAULT 0,
  "StrainId" smallint(5) unsigned NOT NULL DEFAULT 0,
  "error" float NOT NULL,
  PRIMARY KEY ("DataId","StrainId"),
  UNIQUE KEY "DataId" ("DataId","StrainId")
) ENGINE=MyISAM DEFAULT CHARSET=utf8mb4 |
```

Looking good! Now there are two indexes which are the same to

```
MariaDB [db_webqtl]> DROP INDEX DataId ON ProbeSetSE;
```

```
MariaDB [db_webqtl]> show index from ProbeSetSE;
2 rows in set (0.000 sec)
```


### Convert to innodb

So, on to converting to innodb

=> https://mariadb.com/kb/en/converting-tables-from-myisam-to-innodb/

=> https://dataedo.com/kb/query/mysql/list-innodb-tables Show existing innodb tables

Unfortunately we can't swith to 4k page tables because we have existing tables. We'll do that later some day in a controlled fashion.

```
MariaDB [db_webqtl]> ALTER TABLE ProbeSetSE ENGINE = InnoDB;
Query OK, 688744613 rows affected (1 hour 51 min 36.273 sec)
Records: 688744613  Duplicates: 0  Warnings: 0
```

2 hours for a lousy table conversion!

The new file sizes are:

```
-rw-rw---- 1 mysql mysql 1.5K Dec 28 11:33 ProbeSetSE.frm
-rw-rw---- 1 mysql mysql  51G Dec 28 13:25 ProbeSetSE.ibd
```

So the has tripled (including a new index) and during conversion it has both the old and the new on disk. I'll need to make space for this baby.

Let's try OPTIMIZE

```
OPTIMIZE NO_WRITE_TO_BINLOG TABLE ProbeSetSE;
```

Ah, now the size is similar to myisam and loading the mapping page is slighty faster.

## Run tests again

What about performance?

```
MariaDB [db_webqtl]> select count(*) from ProbeSetSE where strainid<20 and error<0.10;
+----------+
| count(*) |
+----------+
| 61625074 |
+----------+
1 row in set (3 min 22.958 sec)
```

Whoah. 3 times slower - which makes sense if you know the physical size of the data. Full table scans should be rare, but we need to make sure we don't slow them down that much!

Again I exported the CSV from

=> http://genenetwork.org/show_trait?trait_id=1427571_at&dataset=HC_M2_0606_P

It took the server 1.46351s seconds to process this page.
It took your browser 2.119 second(s) to render this page

and it shows practically the same results.


## Table template

Prototocol from

=> ./move-to-innodb.gmi

Every table update has to follow the template:

### Check recent backups

* [ ] ascertain there is a backup
* [ ] copy original files

### Make temporary table

If you have enough space, you can create a copy of the actual table and do the work on that:

```
CREATE TABLE new_tbl [AS] SELECT * FROM MYTABLE;
```

Then you can change the column as desired:

```
ALTER TABLE tbl_name MODIFY COLUMN col_name BIGINT AUTO_INCREMENT;
```

Once the process is done, you can rename the tables:

```
DROP MYTABLE;
RENAME TABLE tbl_name TO new_tbl_name, tbl_name2 TO MYTABLE;
```

### Check table structure

```
SHOW CREATE TABLE MYTABLE;
```

```
select * from MYTABLE limit 2;
```

```
select count(*) from MYTABLE;
```

Do this also on Penguin2.

### Check GN1,2,3 code for use of table

```
rg MYTABLE --color=always |less -R
rg MYTABLE --type=py -l|fzf --preview="rg --color=always -A 20 MYTABLE {}" --preview-window=right:85%:wrap
```

### Create test

Some select statement and maybe a page of GN2.

### Create primary key

```
ALTER TABLE MYTABLE
  ADD PRIMARY KEY(col1,col2);
```

### Create indices

```
SHOW INDEX FROM MYTABLE;
DROP INDEX ProbeSetId ON MYTABLE;
```

### Convert to innodb

```
ALTER TABLE MYTABLE ENGINE = InnoDB;
```

### Change charset

```
ALTER TABLE ProbeSetSE CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;
```

### Update fulltext

For those cases see bottom of move-to-innodb.gmi.

### Run optimiser

```
OPTIMIZE NO_WRITE_TO_BINLOG TABLE MYTABLE;
```

After running the optimiser rename the tables

```
RENAME TABLE orig TO orig_old, mytest TO orig;
```

### Check test

## ProbeSetXRef

=> ProbeSetXRef.gmi

## Notes captured from Trello:

In an earlier track I wrote how to deal with Fulltext fields

pjotrp 16 Oct 2019 at 10:47

Fulltext

To list fulltext info for one table do:

```
select group_concat(distinct column_name) from information_schema.STATISTICS where table_schema = 'db_webqtl' and table_name = 'Probeset' and index_type = 'FULLTEXT';
```

Or

```
SHOW CREATE TABLE ProbeSet;

E.g.

  FULLTEXT KEY `SEARCH_GENE_IDX` (`Symbol`,`alias`),
  FULLTEXT KEY `SEARCH_FULL_IDX` (`Name`,`description`,`Symbol`,`alias`,`GenbankId`,`UniGeneId`,`Probe_Target_Description`),
  FULLTEXT KEY `RefSeq_FULL_IDX` (`RefSeq_TranscriptId`)
```

To see all:

```
root@tux02:/var/lib/mysql/db_webqtl# for x in ls -1 *.MYD|sed -e 's,\.MYD,,' ; do echo $x ; mysql -u webqtlout -pwebqtlout db_webqtl -e "select group_concat(distinct column_name) from information_schema.STATISTICS where table_schema = 'db_webqtl' and table_name = '$x' and index_type = 'FULLTEXT'" ; done
```

So we have to fix only

```
ProbeSet
GeneRIF_BASIC
pubmedsearch
```

```
REPAIR TABLE ProbeSet QUICK;
REPAIR TABLE GeneRIF_BASIC QUICK;
REPAIR TABLE pubmedsearch QUICK;
```

Note that GN1 search only appears to use ProbeSet. Reindexing takes
about 10 minutes on Tux02.

After updating to ProbeSet to innodb the following query failed


```
SELECT distinct ProbeSet.Name as TNAME, 0 as thistable, ProbeSetXRef.Mean as TMEAN, ProbeSetXRef.LRS as TLRS, ProbeSetXRef.PVALUE as TPVALUE, ProbeSet.Chr_num as TCHR_NUM, ProbeSet.Mb as TMB, ProbeSet.Symbol as TSYMBOL, ProbeSet.name_num as TNAME_NUM FROM ProbeSetXRef, ProbeSet WHERE ((MATCH (ProbeSet.Name, ProbeSet.description, ProbeSet.symbol, alias, GenbankId, UniGeneId, Probe_Target_Description) AGAINST ('shh' IN BOOLEAN MODE)) or (MATCH (ProbeSet.symbol) AGAINST ('"Hx" "ShhNC" "9530036O11Rik" "Dsh" "Hhg1" "Hxl3" "M100081"' IN BOOLEAN MODE))) and ProbeSet.Id = ProbeSetXRef.ProbeSetId and ProbeSetXRef.ProbeSetFreezeId = 112 ORDER BY ProbeSet.symbol ASC;
```

with

```
ERROR 1191 (HY000): Can't find FULLTEXT index matching the column list
```

The shorter version works

```
SELECT distinct ProbeSet.Name as TNAME, 0 as thistable, ProbeSetXRef.Mean as TMEAN, ProbeSetXRef.LRS as TLRS, ProbeSetXRef.PVALUE as TPVALUE, ProbeSet.Chr_num as TCHR_NUM, ProbeSet.Mb as TMB, ProbeSet.Symbol as TSYMBOL, ProbeSet.name_num as TNAME_NUM FROM ProbeSetXRef, ProbeSet WHERE ((MATCH (ProbeSet.Name, ProbeSet.description, ProbeSet.symbol, alias, GenbankId, UniGeneId, Probe_Target_Description) AGAINST ('"Shh" "ShhNC" "9530036O11Rik" "Dsh" "Hhg1"' IN BOOLEAN MODE))) and ProbeSet.Id = ProbeSetXRef.ProbeSetId and ProbeSetXRef.ProbeSetFreezeId = 112;
```

when you remove any column in the MATCH statement we get this
error. Which kinda makes sense I suppose. We need to add an index
for the single ProbeSet.symbol match. Create it with

```
CREATE FULLTEXT INDEX ft_ProbeSet_Symbol ON ProbeSet(Symbol);
```

Now we have

```
FULLTEXT KEY `SEARCH_GENE_IDX` (`Symbol`,`alias`),
FULLTEXT KEY `SEARCH_FULL_IDX` (`Name`,`description`,`Symbol`,`alias`,`GenbankId`,`UniGeneId`,`Probe_Target_Description`),
FULLTEXT KEY `RefSeq_FULL_IDX` (`RefSeq_TranscriptId`),
FULLTEXT KEY `ft_ProbeSet_Symbol` (`Symbol`)
```

and the query works.

pjotrp 16 Oct 2019 at 09:24 (edited)

Full text search is the least straightforward, see

and

Now for ProbeSet - one of the critical locked tables we need this.

pjotrp 15 Oct 2019 at 16:38 (edited)

```
time mysqlcheck -c -u webqtlout -pwebqtlout db_webqtl
db_webqtl.Docs
warning : 1 client is using or hasn't closed the table properly
status : OK

real 16m52.567s
```

## Convert to InnoDB

The largest tables are

```
1.6G Aug 27  2019 Probe.MYD
2.1G Aug 27  2019 LCorrRamin3.MYD
2.1G Dec  4 22:15 ProbeSetXRef.MYD
2.3G Dec 18 14:56 ProbeSet.MYD
2.6G Aug 27  2019 ProbeSE.MYD
7.1G Nov  2 05:07 ProbeSetSE.MYD
8.3G Aug 28  2019 SnpPattern.MYD
 11G Aug 27  2019 ProbeData.MYD
 11G May 22  2020 GenoData.MYD
 11G Aug 27  2019 SnpAll.MYD
 63G Dec  4 22:15 ProbeSetData.MYD
```

On Penguin2 we are already runing ProbeSetData as

```
238G Jul 10  2020 ProbeSetData.ibd
```

which is pretty massive! It includes the index, which is 180G, so the difference is not that great. Also we should try a 4kb page size. Also make sure to enable innodb_file_per_table.

## Updating tux01

With a recent update the following tables appeared to lock up:
ProbeSet, ProbeSetFreeze, ProbeSetXRef. All of them small, so let's move them to innodb.

```
select count(*) from ProbeSetFreeze limit 2;
+----------+
| count(*) |
+----------+
|      931 |
+----------+
SHOW CREATE TABLE ProbeSetFreeze;
CREATE TABLE `ProbeSetFreeze` (
  `Id` smallint(5) unsigned NOT NULL AUTO_INCREMENT,
  `ProbeFreezeId` smallint(5) unsigned NOT NULL DEFAULT 0,
  `AvgID` smallint(5) unsigned NOT NULL DEFAULT 0,
  `Name` varchar(40) DEFAULT NULL,
  `Name2` varchar(100) NOT NULL DEFAULT '',
  `FullName` varchar(100) NOT NULL DEFAULT '',
  `ShortName` varchar(100) NOT NULL DEFAULT '',
  `CreateTime` date NOT NULL DEFAULT '0000-00-00',
  `OrderList` int(5) DEFAULT NULL,
  `public` tinyint(4) NOT NULL DEFAULT 0,
  `confidentiality` tinyint(4) NOT NULL DEFAULT 0,
  `AuthorisedUsers` varchar(300) NOT NULL,
  `DataScale` varchar(20) NOT NULL DEFAULT 'log2',
  PRIMARY KEY (`Id`),
  UNIQUE KEY `FullName` (`FullName`),
  UNIQUE KEY `Name` (`Name`),
  KEY `NameIndex` (`Name2`)
) ENGINE=MyISAM AUTO_INCREMENT=1054 DEFAULT CHARSET=latin1
```

There is a primary key. Good.

ALTER TABLE ProbeSetSE
  ADD PRIMARY KEY(DataId,StrainId);
Query OK, 688744613 rows affected (15 min 13.830 sec)
Records: 688744613  Duplicates: 0  Warnings: 0
```

Unsurprisingly the index grew

```
-rw-rw---- 1 mysql mysql  16G Dec 28 11:06 ProbeSetSE.MYI
```

### Change charset

```
MariaDB [db_webqtl]> SHOW CHARACTER SET LIKE 'utf8mb4';
+---------+---------------+--------------------+--------+
| Charset | Description   | Default collation  | Maxlen |
+---------+---------------+--------------------+--------+
| utf8mb4 | UTF-8 Unicode | utf8mb4_general_ci |      4 |
+---------+---------------+--------------------+--------+
1 row in set (0.000 sec)
```

```
MariaDB [db_webqtl]> ALTER TABLE ProbeSetSE CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;
Stage: 2 of 2 'Enabling keys'      0% of stage done
Query OK, 688744613 rows affected (15 min 14.380 sec)
Records: 688744613  Duplicates: 0  Warnings: 0
```

For this table it has no effect since there are not text fields. Still this looks good:

```
SHOW CREATE TABLE ProbeSetSE;
| ProbeSetSE | CREATE TABLE "ProbeSetSE" (
  "DataId" int(10) unsigned NOT NULL DEFAULT 0,
  "StrainId" smallint(5) unsigned NOT NULL DEFAULT 0,
  "error" float NOT NULL,
  PRIMARY KEY ("DataId","StrainId"),
  UNIQUE KEY "DataId" ("DataId","StrainId")
) ENGINE=MyISAM DEFAULT CHARSET=utf8mb4 |
```

Looking good! Now there are two indexes which are the same to

```
MariaDB [db_webqtl]> DROP INDEX DataId ON ProbeSetSE;
```

```
MariaDB [db_webqtl]> show index from ProbeSetSE;
2 rows in set (0.000 sec)
```


### Convert to innodb

So, on to converting to innodb

=> https://mariadb.com/kb/en/converting-tables-from-myisam-to-innodb/

=> https://dataedo.com/kb/query/mysql/list-innodb-tables Show existing innodb tables

Unfortunately we can't swith to 4k page tables because we have existing tables. We'll do that later some day in a controlled fashion.

```
MariaDB [db_webqtl]> ALTER TABLE ProbeSetSE ENGINE = InnoDB;
Query OK, 688744613 rows affected (1 hour 51 min 36.273 sec)
Records: 688744613  Duplicates: 0  Warnings: 0
```

2 hours for a lousy table conversion!

The new file sizes are:

```
-rw-rw---- 1 mysql mysql 1.5K Dec 28 11:33 ProbeSetSE.frm
-rw-rw---- 1 mysql mysql  51G Dec 28 13:25 ProbeSetSE.ibd
```

So the has tripled (including a new index) and during conversion it has both the old and the new on disk. I'll need to make space for this baby.

Let's try OPTIMIZE

```
OPTIMIZE NO_WRITE_TO_BINLOG TABLE ProbeSetSE;
```

Ah, now the size is similar to myisam and loading the mapping page is slighty faster.

## Run tests again

What about performance?

```
MariaDB [db_webqtl]> select count(*) from ProbeSetSE where strainid<20 and error<0.10;
+----------+
| count(*) |
+----------+
| 61625074 |
+----------+
1 row in set (3 min 22.958 sec)
```

Whoah. 3 times slower - which makes sense if you know the physical size of the data. Full table scans should be rare, but we need to make sure we don't slow them down that much!

Again I exported the CSV from

=> http://genenetwork.org/show_trait?trait_id=1427571_at&dataset=HC_M2_0606_P

It took the server 1.46351s seconds to process this page.
It took your browser 2.119 second(s) to render this page

and it shows practically the same results.


## Table template

Prototocol from

=> ./move-to-innodb.gmi

Every table update has to follow the template:

### Check recent backups

* [ ] ascertain there is a backup
* [ ] copy original files

### Make temporary table

If you have enough space, you can create a copy of the actual table and do the work on that:

```
CREATE TABLE new_tbl [AS] SELECT * FROM MYTABLE;
```

Then you can change the column as desired:

```
ALTER TABLE tbl_name MODIFY COLUMN col_name BIGINT AUTO_INCREMENT;
```

Once the process is done, you can rename the tables:

```
DROP MYTABLE;
RENAME TABLE tbl_name TO new_tbl_name, tbl_name2 TO MYTABLE;
```

### Check table structure

```
SHOW CREATE TABLE MYTABLE;
```

```
select * from MYTABLE limit 2;
```

```
select count(*) from MYTABLE;
```

Do this also on Penguin2.

### Check GN1,2,3 code for use of table

```
rg MYTABLE --color=always |less -R
rg MYTABLE --type=py -l|fzf --preview="rg --color=always -A 20 MYTABLE {}" --preview-window=right:85%:wrap
```

### Create test

Some select statement and maybe a page of GN2.

### Create primary key

```
ALTER TABLE MYTABLE
  ADD PRIMARY KEY(col1,col2);
```

### Create indices

```
SHOW INDEX FROM MYTABLE;
DROP INDEX ProbeSetId ON MYTABLE;
```

### Convert to innodb

```
ALTER TABLE MYTABLE ENGINE = InnoDB;
```

### Change charset

```
ALTER TABLE ProbeSetSE CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;
```

### Update fulltext

For those cases see bottom of move-to-innodb.gmi.

### Run optimiser

```
OPTIMIZE NO_WRITE_TO_BINLOG TABLE MYTABLE;
```

After running the optimiser rename the tables

```
RENAME TABLE orig TO orig_old, mytest TO orig;
```

### Check test

## ProbeSetXRef

=> ProbeSetXRef.gmi

## Notes captured from Trello:

In an earlier track I wrote how to deal with Fulltext fields

pjotrp 16 Oct 2019 at 10:47

Fulltext

To list fulltext info for one table do:

```
select group_concat(distinct column_name) from information_schema.STATISTICS where table_schema = 'db_webqtl' and table_name = 'Probeset' and index_type = 'FULLTEXT';
```

Or

```
SHOW CREATE TABLE ProbeSet;

E.g.

  FULLTEXT KEY `SEARCH_GENE_IDX` (`Symbol`,`alias`),
  FULLTEXT KEY `SEARCH_FULL_IDX` (`Name`,`description`,`Symbol`,`alias`,`GenbankId`,`UniGeneId`,`Probe_Target_Description`),
  FULLTEXT KEY `RefSeq_FULL_IDX` (`RefSeq_TranscriptId`)
```

To see all:

```
root@tux02:/var/lib/mysql/db_webqtl# for x in ls -1 *.MYD|sed -e 's,\.MYD,,' ; do echo $x ; mysql -u webqtlout -pwebqtlout db_webqtl -e "select group_concat(distinct column_name) from information_schema.STATISTICS where table_schema = 'db_webqtl' and table_name = '$x' and index_type = 'FULLTEXT'" ; done
```

So we have to fix only

```
ProbeSet
GeneRIF_BASIC
pubmedsearch
```

```
REPAIR TABLE ProbeSet QUICK;
REPAIR TABLE GeneRIF_BASIC QUICK;
REPAIR TABLE pubmedsearch QUICK;
```

Note that GN1 search only appears to use ProbeSet. Reindexing takes
about 10 minutes on Tux02.

After updating to ProbeSet to innodb the following query failed


```
SELECT distinct ProbeSet.Name as TNAME, 0 as thistable, ProbeSetXRef.Mean as TMEAN, ProbeSetXRef.LRS as TLRS, ProbeSetXRef.PVALUE as TPVALUE, ProbeSet.Chr_num as TCHR_NUM, ProbeSet.Mb as TMB, ProbeSet.Symbol as TSYMBOL, ProbeSet.name_num as TNAME_NUM FROM ProbeSetXRef, ProbeSet WHERE ((MATCH (ProbeSet.Name, ProbeSet.description, ProbeSet.symbol, alias, GenbankId, UniGeneId, Probe_Target_Description) AGAINST ('shh' IN BOOLEAN MODE)) or (MATCH (ProbeSet.symbol) AGAINST ('"Hx" "ShhNC" "9530036O11Rik" "Dsh" "Hhg1" "Hxl3" "M100081"' IN BOOLEAN MODE))) and ProbeSet.Id = ProbeSetXRef.ProbeSetId and ProbeSetXRef.ProbeSetFreezeId = 112 ORDER BY ProbeSet.symbol ASC;
```

with

```
ERROR 1191 (HY000): Can't find FULLTEXT index matching the column list
```

The shorter version works

```
SELECT distinct ProbeSet.Name as TNAME, 0 as thistable, ProbeSetXRef.Mean as TMEAN, ProbeSetXRef.LRS as TLRS, ProbeSetXRef.PVALUE as TPVALUE, ProbeSet.Chr_num as TCHR_NUM, ProbeSet.Mb as TMB, ProbeSet.Symbol as TSYMBOL, ProbeSet.name_num as TNAME_NUM FROM ProbeSetXRef, ProbeSet WHERE ((MATCH (ProbeSet.Name, ProbeSet.description, ProbeSet.symbol, alias, GenbankId, UniGeneId, Probe_Target_Description) AGAINST ('"Shh" "ShhNC" "9530036O11Rik" "Dsh" "Hhg1"' IN BOOLEAN MODE))) and ProbeSet.Id = ProbeSetXRef.ProbeSetId and ProbeSetXRef.ProbeSetFreezeId = 112;
```

when you remove any column in the MATCH statement we get this
error. Which kinda makes sense I suppose. We need to add an index
for the single ProbeSet.symbol match. Create it with

```
CREATE FULLTEXT INDEX ft_ProbeSet_Symbol ON ProbeSet(Symbol);
```

Now we have

```
FULLTEXT KEY `SEARCH_GENE_IDX` (`Symbol`,`alias`),
FULLTEXT KEY `SEARCH_FULL_IDX` (`Name`,`description`,`Symbol`,`alias`,`GenbankId`,`UniGeneId`,`Probe_Target_Description`),
FULLTEXT KEY `RefSeq_FULL_IDX` (`RefSeq_TranscriptId`),
FULLTEXT KEY `ft_ProbeSet_Symbol` (`Symbol`)
```

and the query works.

pjotrp 16 Oct 2019 at 09:24 (edited)

Full text search is the least straightforward, see

and

Now for ProbeSet - one of the critical locked tables we need this.

pjotrp 15 Oct 2019 at 16:38 (edited)

```
time mysqlcheck -c -u webqtlout -pwebqtlout db_webqtl
db_webqtl.Docs
warning : 1 client is using or hasn't closed the table properly
status : OK

real 16m52.567s
```

## Convert to InnoDB

The largest tables are

```
1.6G Aug 27  2019 Probe.MYD
2.1G Aug 27  2019 LCorrRamin3.MYD
2.1G Dec  4 22:15 ProbeSetXRef.MYD
2.3G Dec 18 14:56 ProbeSet.MYD
2.6G Aug 27  2019 ProbeSE.MYD
7.1G Nov  2 05:07 ProbeSetSE.MYD
8.3G Aug 28  2019 SnpPattern.MYD
 11G Aug 27  2019 ProbeData.MYD
 11G May 22  2020 GenoData.MYD
 11G Aug 27  2019 SnpAll.MYD
 63G Dec  4 22:15 ProbeSetData.MYD
```

On Penguin2 we are already runing ProbeSetData as

```
238G Jul 10  2020 ProbeSetData.ibd
```

which is pretty massive! It includes the index, which is 180G, so the difference is not that great. Also we should try a 4kb page size. Also make sure to enable innodb_file_per_table.

## Updating tux01

With a recent update the following tables appeared to lock up:
ProbeSet, ProbeSetFreeze, ProbeSetXRef. All of them small, so let's move them to innodb.

```
select count(*) from ProbeSetFreeze limit 2;
+----------+
| count(*) |
+----------+
|      931 |
+----------+
SHOW CREATE TABLE ProbeSetFreeze;
CREATE TABLE `ProbeSetFreeze` (
  `Id` smallint(5) unsigned NOT NULL AUTO_INCREMENT,
  `ProbeFreezeId` smallint(5) unsigned NOT NULL DEFAULT 0,
  `AvgID` smallint(5) unsigned NOT NULL DEFAULT 0,
  `Name` varchar(40) DEFAULT NULL,
  `Name2` varchar(100) NOT NULL DEFAULT '',
  `FullName` varchar(100) NOT NULL DEFAULT '',
  `ShortName` varchar(100) NOT NULL DEFAULT '',
  `CreateTime` date NOT NULL DEFAULT '0000-00-00',
  `OrderList` int(5) DEFAULT NULL,
  `public` tinyint(4) NOT NULL DEFAULT 0,
  `confidentiality` tinyint(4) NOT NULL DEFAULT 0,
  `AuthorisedUsers` varchar(300) NOT NULL,
  `DataScale` varchar(20) NOT NULL DEFAULT 'log2',
  PRIMARY KEY (`Id`),
  UNIQUE KEY `FullName` (`FullName`),
  UNIQUE KEY `Name` (`Name`),
  KEY `NameIndex` (`Name2`)
) ENGINE=MyISAM AUTO_INCREMENT=1054 DEFAULT CHARSET=latin1
```

There is a primary key. Good. You might want to check

```
mysql -uwebqtlout -pwebqtlout db_webqtl
SHOW FULL PROCESSLIST;
flush tables;
ALTER TABLE ProbeSetFreeze CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;
```

This makes GN a bit snappier, it appears. Next to fix is the AccessLog because Gn1 writes to it.

So:

```
show create table TempData;
ALTER TABLE TempData CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;
ALTER TABLE TempData ENGINE = InnoDB;
alter table TempData add primary key (Id);
show create table TempData;
```

## Tags

* assigned: pjotr
* type: enhancement, documentation
* status: unclear
* priority: medium
* keywords: database, mariadb, innodb