From 893164a15a18030715167c45f0d114d13e37aadb Mon Sep 17 00:00:00 2001 From: Sam Ockman Date: Sun, 10 Jun 2012 05:33:44 -0400 Subject: Modified pylintrc --- wqflask/other_config/dot.pylintrc | 249 ++++++++++++++++++++++++++++++++++++++ wqflask/other_config/pylintrc | 249 -------------------------------------- 2 files changed, 249 insertions(+), 249 deletions(-) create mode 100644 wqflask/other_config/dot.pylintrc delete mode 100644 wqflask/other_config/pylintrc (limited to 'wqflask') diff --git a/wqflask/other_config/dot.pylintrc b/wqflask/other_config/dot.pylintrc new file mode 100644 index 00000000..2774300a --- /dev/null +++ b/wqflask/other_config/dot.pylintrc @@ -0,0 +1,249 @@ +[MASTER] + +# Specify a configuration file. +#rcfile= + +# Python code to execute, usually for sys.path manipulation such as +# pygtk.require(). +#init-hook= + +# Profiled execution. +profile=no + +# Add files or directories to the blacklist. They should be base names, not +# paths. +ignore=CVS + +# Pickle collected data for later comparisons. +persistent=yes + +# List of plugins (as comma separated values of python modules names) to load, +# usually to register additional checkers. +load-plugins= + + +[MESSAGES CONTROL] + +# Enable the message, report, category or checker with the given id(s). You can +# either give multiple identifier separated by comma (,) or put this option +# multiple time. +#enable= + +# Disable the message, report, category or checker with the given id(s). You +# can either give multiple identifier separated by comma (,) or put this option +# multiple time (only on the command line, not in the configuration file where +# it should appear only once). +#disable= + + +[REPORTS] + +# Set the output format. Available formats are text, parseable, colorized, msvs +# (visual studio) and html +output-format=colorized + +# Include message's id in output +include-ids=no + +# Put messages in a separate file for each module / package specified on the +# command line instead of printing them on stdout. Reports (if any) will be +# written in a file name "pylint_global.[txt|html]". +files-output=no + +# Tells whether to display a full report or only the messages +reports=yes + +# Python expression which should return a note less than 10 (10 is the highest +# note). You have access to the variables errors warning, statement which +# respectively contain the number of errors / warnings messages and the total +# number of statements analyzed. This is used by the global evaluation report +# (RP0004). +evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) + +# Add a comment according to your evaluation note. This is used by the global +# evaluation report (RP0004). +comment=no + + +[MISCELLANEOUS] + +# List of note tags to take in consideration, separated by a comma. +notes=FIXME,XXX,TODO + + +[TYPECHECK] + +# Tells whether missing members accessed in mixin class should be ignored. A +# mixin class is detected if its name ends with "mixin" (case insensitive). +ignore-mixin-members=yes + +# List of classes names for which member attributes should not be checked +# (useful for classes with attributes dynamically set). +ignored-classes=SQLObject + +# When zope mode is activated, add a predefined set of Zope acquired attributes +# to generated-members. +zope=no + +# List of members which are set dynamically and missed by pylint inference +# system, and so shouldn't trigger E0201 when accessed. Python regular +# expressions are accepted. +generated-members=REQUEST,acl_users,aq_parent + + +[SIMILARITIES] + +# Minimum lines number of a similarity. +min-similarity-lines=4 + +# Ignore comments when computing similarities. +ignore-comments=yes + +# Ignore docstrings when computing similarities. +ignore-docstrings=yes + + +[BASIC] + +# Required attributes for module, separated by a comma +required-attributes= + +# List of builtins function names that should not be used, separated by a comma +bad-functions=map,filter,apply,input + +# Regular expression which should only match correct module names +module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ + +# Regular expression which should only match correct module level names +const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ + +# Regular expression which should only match correct class names +class-rgx=[A-Z_][a-zA-Z0-9]+$ + +# Regular expression which should only match correct function names +function-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression which should only match correct method names +method-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression which should only match correct instance attribute names +attr-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression which should only match correct argument names +argument-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression which should only match correct variable names +variable-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression which should only match correct list comprehension / +# generator expression variable names +inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ + +# Good variable names which should always be accepted, separated by a comma +good-names=i,j,k,ex,Run,_ + +# Bad variable names which should always be refused, separated by a comma +bad-names=foo,bar,baz,toto,tutu,tata + +# Regular expression which should only match functions or classes name which do +# not require a docstring +no-docstring-rgx=__.*__ + + +[VARIABLES] + +# Tells whether we should check for unused import in __init__ files. +init-import=no + +# A regular expression matching the beginning of the name of dummy variables +# (i.e. not used). +dummy-variables-rgx=_|dummy + +# List of additional names supposed to be defined in builtins. Remember that +# you should avoid to define new builtins when possible. +additional-builtins= + + +[FORMAT] + +# Maximum number of characters on a single line. +max-line-length=100 + +# Maximum number of lines in a module +max-module-lines=1000 + +# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 +# tab). +indent-string=' ' + + +[IMPORTS] + +# Deprecated modules which should not be used, separated by a comma +deprecated-modules=regsub,string,TERMIOS,Bastion,rexec + +# Create a graph of every (i.e. internal and external) dependencies in the +# given file (report RP0402 must not be disabled) +import-graph= + +# Create a graph of external dependencies in the given file (report RP0402 must +# not be disabled) +ext-import-graph= + +# Create a graph of internal dependencies in the given file (report RP0402 must +# not be disabled) +int-import-graph= + + +[DESIGN] + +# Maximum number of arguments for function / method +max-args=5 + +# Argument names that match this expression will be ignored. Default to name +# with leading underscore +ignored-argument-names=_.* + +# Maximum number of locals for function / method body +max-locals=15 + +# Maximum number of return / yield for function / method body +max-returns=6 + +# Maximum number of branch for function / method body +max-branchs=12 + +# Maximum number of statements in function / method body +max-statements=50 + +# Maximum number of parents for a class (see R0901). +max-parents=7 + +# Maximum number of attributes for a class (see R0902). +max-attributes=7 + +# Minimum number of public methods for a class (see R0903). +min-public-methods=2 + +# Maximum number of public methods for a class (see R0904). +max-public-methods=20 + + +[CLASSES] + +# List of interface methods to ignore, separated by a comma. This is used for +# instance to not check methods defines in Zope's Interface base class. +ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by + +# List of method names used to declare (i.e. assign) instance attributes. +defining-attr-methods=__init__,__new__,setUp + +# List of valid names for the first argument in a class method. +valid-classmethod-first-arg=cls + + +[EXCEPTIONS] + +# Exceptions that will emit a warning when being caught. Defaults to +# "Exception" +overgeneral-exceptions=Exception diff --git a/wqflask/other_config/pylintrc b/wqflask/other_config/pylintrc deleted file mode 100644 index c42acc35..00000000 --- a/wqflask/other_config/pylintrc +++ /dev/null @@ -1,249 +0,0 @@ -[MASTER] - -# Specify a configuration file. -#rcfile= - -# Python code to execute, usually for sys.path manipulation such as -# pygtk.require(). -#init-hook= - -# Profiled execution. -profile=no - -# Add files or directories to the blacklist. They should be base names, not -# paths. -ignore=CVS - -# Pickle collected data for later comparisons. -persistent=yes - -# List of plugins (as comma separated values of python modules names) to load, -# usually to register additional checkers. -load-plugins= - - -[MESSAGES CONTROL] - -# Enable the message, report, category or checker with the given id(s). You can -# either give multiple identifier separated by comma (,) or put this option -# multiple time. -#enable= - -# Disable the message, report, category or checker with the given id(s). You -# can either give multiple identifier separated by comma (,) or put this option -# multiple time (only on the command line, not in the configuration file where -# it should appear only once). -#disable= - - -[REPORTS] - -# Set the output format. Available formats are text, parseable, colorized, msvs -# (visual studio) and html -output-format=text - -# Include message's id in output -include-ids=no - -# Put messages in a separate file for each module / package specified on the -# command line instead of printing them on stdout. Reports (if any) will be -# written in a file name "pylint_global.[txt|html]". -files-output=no - -# Tells whether to display a full report or only the messages -reports=yes - -# Python expression which should return a note less than 10 (10 is the highest -# note). You have access to the variables errors warning, statement which -# respectively contain the number of errors / warnings messages and the total -# number of statements analyzed. This is used by the global evaluation report -# (RP0004). -evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) - -# Add a comment according to your evaluation note. This is used by the global -# evaluation report (RP0004). -comment=no - - -[MISCELLANEOUS] - -# List of note tags to take in consideration, separated by a comma. -notes=FIXME,XXX,TODO - - -[TYPECHECK] - -# Tells whether missing members accessed in mixin class should be ignored. A -# mixin class is detected if its name ends with "mixin" (case insensitive). -ignore-mixin-members=yes - -# List of classes names for which member attributes should not be checked -# (useful for classes with attributes dynamically set). -ignored-classes=SQLObject - -# When zope mode is activated, add a predefined set of Zope acquired attributes -# to generated-members. -zope=no - -# List of members which are set dynamically and missed by pylint inference -# system, and so shouldn't trigger E0201 when accessed. Python regular -# expressions are accepted. -generated-members=REQUEST,acl_users,aq_parent - - -[SIMILARITIES] - -# Minimum lines number of a similarity. -min-similarity-lines=4 - -# Ignore comments when computing similarities. -ignore-comments=yes - -# Ignore docstrings when computing similarities. -ignore-docstrings=yes - - -[BASIC] - -# Required attributes for module, separated by a comma -required-attributes= - -# List of builtins function names that should not be used, separated by a comma -bad-functions=map,filter,apply,input - -# Regular expression which should only match correct module names -module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ - -# Regular expression which should only match correct module level names -const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ - -# Regular expression which should only match correct class names -class-rgx=[A-Z_][a-zA-Z0-9]+$ - -# Regular expression which should only match correct function names -function-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression which should only match correct method names -method-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression which should only match correct instance attribute names -attr-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression which should only match correct argument names -argument-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression which should only match correct variable names -variable-rgx=[a-z_][a-z0-9_]{2,30}$ - -# Regular expression which should only match correct list comprehension / -# generator expression variable names -inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ - -# Good variable names which should always be accepted, separated by a comma -good-names=i,j,k,ex,Run,_ - -# Bad variable names which should always be refused, separated by a comma -bad-names=foo,bar,baz,toto,tutu,tata - -# Regular expression which should only match functions or classes name which do -# not require a docstring -no-docstring-rgx=__.*__ - - -[VARIABLES] - -# Tells whether we should check for unused import in __init__ files. -init-import=no - -# A regular expression matching the beginning of the name of dummy variables -# (i.e. not used). -dummy-variables-rgx=_|dummy - -# List of additional names supposed to be defined in builtins. Remember that -# you should avoid to define new builtins when possible. -additional-builtins= - - -[FORMAT] - -# Maximum number of characters on a single line. -max-line-length=80 - -# Maximum number of lines in a module -max-module-lines=1000 - -# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 -# tab). -indent-string=' ' - - -[IMPORTS] - -# Deprecated modules which should not be used, separated by a comma -deprecated-modules=regsub,string,TERMIOS,Bastion,rexec - -# Create a graph of every (i.e. internal and external) dependencies in the -# given file (report RP0402 must not be disabled) -import-graph= - -# Create a graph of external dependencies in the given file (report RP0402 must -# not be disabled) -ext-import-graph= - -# Create a graph of internal dependencies in the given file (report RP0402 must -# not be disabled) -int-import-graph= - - -[DESIGN] - -# Maximum number of arguments for function / method -max-args=5 - -# Argument names that match this expression will be ignored. Default to name -# with leading underscore -ignored-argument-names=_.* - -# Maximum number of locals for function / method body -max-locals=15 - -# Maximum number of return / yield for function / method body -max-returns=6 - -# Maximum number of branch for function / method body -max-branchs=12 - -# Maximum number of statements in function / method body -max-statements=50 - -# Maximum number of parents for a class (see R0901). -max-parents=7 - -# Maximum number of attributes for a class (see R0902). -max-attributes=7 - -# Minimum number of public methods for a class (see R0903). -min-public-methods=2 - -# Maximum number of public methods for a class (see R0904). -max-public-methods=20 - - -[CLASSES] - -# List of interface methods to ignore, separated by a comma. This is used for -# instance to not check methods defines in Zope's Interface base class. -ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by - -# List of method names used to declare (i.e. assign) instance attributes. -defining-attr-methods=__init__,__new__,setUp - -# List of valid names for the first argument in a class method. -valid-classmethod-first-arg=cls - - -[EXCEPTIONS] - -# Exceptions that will emit a warning when being caught. Defaults to -# "Exception" -overgeneral-exceptions=Exception -- cgit v1.2.3